CE-2HxxM PCB or gerber files available?

Talk in English

Modérateur : Politburo

Répondre
techsurrect
Fonctionne à 75 bauds
Fonctionne à 75 bauds
Messages : 2
Enregistré le : 04 juin 2022 00:34
Localisation : Sweden
Contact :

CE-2HxxM PCB or gerber files available?

Message par techsurrect »

Aware that there is a 256K version of the CE-2HxxM is available but are there clean PCB cards/kit available so they can be soldered to the needs one have (based on what the device support) or gerber files available? Finding vintage cards isn't the easiest so assume that there must be some community efforts covering this :) I'm currently trying to locate 32K RAM cards to be used with Sharp PC-1360.
radivare
Fonctionne à 75 bauds
Fonctionne à 75 bauds
Messages : 54
Enregistré le : 02 juin 2022 22:36
Localisation : TOULOUSE

Re: CE-2HxxM PCB or gerber files available?

Message par radivare »

Hello,

Before to post what I did with my sharp 1360, I looked to see if someone already did amemory modding and found your message.
As no similar mod is visible on this site I share with you what I did:
http://silicium.org/forum/viewtopic.php ... 62#p573379

Initial target was to get 1360 with an embedded memory to avoid external RAMCARD usage in order to start the machine.
If interrested in I can share modification.
I did also an update of an original 8ko RAMCARD to get 32ko.
http://silicium.org/forum/viewtopic.php?f=51&t=44209
I 'm pretty sure that I can draw the complete schematic if needed to go for a PCB

Best regards
Répondre

Retourner vers « Silicium in English »