Waiting List for Bluetooth Module for SHARP Pocket Computer
Modérateur : Politburo
-
- Fonctionne à 300 bauds
- Messages : 102
- Enregistré le : 06 mai 2015 12:06
Re: NEW: Generic Bluetooth Module for SHARP Pocket Computer
Hi Christophe,
I have put you on the waiting list
For a proper wired USB/PC connection with SHARP pockets, I highly recommend my article here:
viewtopic.php?f=17&t=42285
… and to get the most out of your G850VS my article about the possibilities of its 11-pin interface:
viewtopic.php?f=17&t=41175
It seems like there might be enough interests for another batch until this winter - the probem will probably be my spare time.
Making it OpenSource would be a possibility in case. We‘ll see.
Best
Tom
I have put you on the waiting list
For a proper wired USB/PC connection with SHARP pockets, I highly recommend my article here:
viewtopic.php?f=17&t=42285
… and to get the most out of your G850VS my article about the possibilities of its 11-pin interface:
viewtopic.php?f=17&t=41175
It seems like there might be enough interests for another batch until this winter - the probem will probably be my spare time.
Making it OpenSource would be a possibility in case. We‘ll see.
Best
Tom
Re: NEW: Generic Bluetooth Module for SHARP Pocket Computer
Hi Tom,
I would take two of your RS232C 15Pin/11Pin Bluetooth kits to simplify communication with my PC-1600, PC-E500 and PC-1475 devices.
Is it possible to communicate between two pocket computers wirelessly with two of your Bluetooth kits?
Self soldering would also be OK for me.
Thanks,
Thomas
I would take two of your RS232C 15Pin/11Pin Bluetooth kits to simplify communication with my PC-1600, PC-E500 and PC-1475 devices.
Is it possible to communicate between two pocket computers wirelessly with two of your Bluetooth kits?
Self soldering would also be OK for me.
Thanks,
Thomas
-
- Fonctionne à 300 bauds
- Messages : 102
- Enregistré le : 06 mai 2015 12:06
Re: NEW: Generic Bluetooth Module for SHARP Pocket Computer
Hi oelli,
thanks for your request, I also put you on the waiting list for a possible next batch.
A wireless connection between two pockets via BT should be possible. I think one of the two modules must be reconfigured then, but this can easily be done from your PC-1600 with a special prog.
Cheers Tom
thanks for your request, I also put you on the waiting list for a possible next batch.
A wireless connection between two pockets via BT should be possible. I think one of the two modules must be reconfigured then, but this can easily be done from your PC-1600 with a special prog.
Cheers Tom
-
- Fonctionne à 75 bauds
- Messages : 4
- Enregistré le : 08 nov. 2020 23:50
- Localisation : London
Re: NEW: Generic Bluetooth Module for SHARP Pocket Computer
Hello Tom, thank you for your ongoing efforts on this! Please add me to the list for the next batch. Andrew
-
- Fonctionne à 300 bauds
- Messages : 102
- Enregistré le : 06 mai 2015 12:06
-
- Fonctionne à 75 bauds
- Messages : 1
- Enregistré le : 31 août 2022 00:09
Re: NEW: Generic Bluetooth Module for SHARP Pocket Computer
Spellbound ... Would you please add me to the list for your next production run? I really appreciate the effort it took/takes for you to make this device available ...
Merci beaucoup!
Merci beaucoup!
-
- Fonctionne à 300 bauds
- Messages : 102
- Enregistré le : 06 mai 2015 12:06
-
- Fonctionne à 300 bauds
- Messages : 102
- Enregistré le : 06 mai 2015 12:06
Re: NEW: Generic Bluetooth Module for SHARP Pocket Computer
Hi folks, here is a status update:
Meanwhile there are enough requests/interests that would motivate a 2nd batch.
But here's the downer:
The current situation at the integrated circuit market is a real pain. Poor availability of the Bluetooth chip I'm using and prices for hardware/parts in general are exploding due to shipping costs from China, so I'm currently not able to calculate a proper price for the module in advance.
I think we have to wait until the situation stabilizes.
But meanwhile you could take a look at my newest project, which is a fully integrated USB-stick interface for the PC-1600!
New: PC-1600 USB-Stick Interface
This one is not as generic as the Bluetooth module (PC-1600 only) but perhaps for some of you it's an (even better?) alternative or addition - especially if your use case is rather mass storage than program upload during the software development cycle. However, I can't tell which one I'm able to produce first.
All the best
Tom
Meanwhile there are enough requests/interests that would motivate a 2nd batch.
But here's the downer:
The current situation at the integrated circuit market is a real pain. Poor availability of the Bluetooth chip I'm using and prices for hardware/parts in general are exploding due to shipping costs from China, so I'm currently not able to calculate a proper price for the module in advance.
I think we have to wait until the situation stabilizes.
But meanwhile you could take a look at my newest project, which is a fully integrated USB-stick interface for the PC-1600!
New: PC-1600 USB-Stick Interface
This one is not as generic as the Bluetooth module (PC-1600 only) but perhaps for some of you it's an (even better?) alternative or addition - especially if your use case is rather mass storage than program upload during the software development cycle. However, I can't tell which one I'm able to produce first.
All the best
Tom
-
- Fonctionne à 75 bauds
- Messages : 1
- Enregistré le : 27 nov. 2022 13:33
Re: NEW: Generic Bluetooth Module for SHARP Pocket Computer
Hello,
let me know when a kit is available
and I also want a finished product.
I register for a kit and
a finished product.
Best regards,
jeanpierre
let me know when a kit is available
and I also want a finished product.
I register for a kit and
a finished product.
Best regards,
jeanpierre
-
- Fonctionne à 300 bauds
- Messages : 102
- Enregistré le : 06 mai 2015 12:06
Re: NEW: Generic Bluetooth Module for SHARP Pocket Computer
ok, I have put you on the waiting list. I cannot tell yet if there will be a kit option or assembled modules only.
Currently the chip market is still a mess.
Cheers Tom
Currently the chip market is still a mess.
Cheers Tom
Re: NEW: Generic Bluetooth Module for SHARP Pocket Computer
Hi,
The usb stick module is the killer apps for the 1600.
My usb keyboard module was modified by Tom for the usbstick...
And it's Just all I ever wanted for the 1600.
It's not Just storage, it's about files transfert from pc...
It's the pc 1600 équivalent of the pc xtide...
With réserve keys updated for it. It's efficient, very fast and without any headache regarding conversion or transfert protocole...
And you can have all soft ever created for 1600 now with you, available in few seconds...
The usb stick module is the killer apps for the 1600.
My usb keyboard module was modified by Tom for the usbstick...
And it's Just all I ever wanted for the 1600.
It's not Just storage, it's about files transfert from pc...
It's the pc 1600 équivalent of the pc xtide...
With réserve keys updated for it. It's efficient, very fast and without any headache regarding conversion or transfert protocole...
And you can have all soft ever created for 1600 now with you, available in few seconds...
Recherche :
National JR-800 - Husky fc486 - TO16
Echange :
Macintosh Mac Plus & Classic - Epson px4 - Sharp PC 1100 - 1600 & 1600k
National JR-800 - Husky fc486 - TO16
Echange :
Macintosh Mac Plus & Classic - Epson px4 - Sharp PC 1100 - 1600 & 1600k
- Dom
- Fonctionne à 2400 bauds
- Messages : 1366
- Enregistré le : 26 oct. 2018 18:45
- Localisation : Ile-de-France
Re: NEW: Generic Bluetooth Module for SHARP Pocket Computer
Hi Tom,
As I can read, it's very tempting...
Maybe I'll put an option for a copy.
Is there a deadline?
Kind regards
As I can read, it's very tempting...
Maybe I'll put an option for a copy.
Is there a deadline?
Kind regards
Moi, c'est les poquettes, et la Coll'à'Dom, c'est là
- Over_score
- Fonctionne à 300 bauds
- Messages : 168
- Enregistré le : 26 mars 2019 14:55
- Localisation : Pas loin de Smartville
Re: NEW: Generic Bluetooth Module for SHARP Pocket Computer
Yes, very tempting!
Please put me on the waiting list.
Thank you for all your valuable work.
Please put me on the waiting list.
Thank you for all your valuable work.
-
- Fonctionne à 1200 bauds
- Messages : 306
- Enregistré le : 27 oct. 2019 21:46
- Localisation : Ile de France
Re: NEW: Generic Bluetooth Module for SHARP Pocket Computer
Hello Tom,
I am interessed for my Pc1600, i want a finished product
Thank a lot
Best regards
Seb
I am interessed for my Pc1600, i want a finished product
Thank a lot
Best regards
Seb
-
- Fonctionne à 300 bauds
- Messages : 102
- Enregistré le : 06 mai 2015 12:06
Re: NEW: Generic Bluetooth Module for SHARP Pocket Computer
Thank you for your feedback!
Since I already get requests from you for the (hopefully) upcoming USB-stick interface module for SHARP PC-1600, I just created a waiting list:
http://www.silicium.org/forum/viewtopic ... 24&t=47982
So please from now on let us separate your posts/requests regarding the Bluetooth module (here) and the USB-stick module (PC-1600 only) in the other thread.
If you want to switch e.g. from the BT module to the USB-stick module, please inform me in one of the threads
@Dom, Over_score, seb_A2: I moved your requests to the other thread (right?)
Since I already get requests from you for the (hopefully) upcoming USB-stick interface module for SHARP PC-1600, I just created a waiting list:
http://www.silicium.org/forum/viewtopic ... 24&t=47982
So please from now on let us separate your posts/requests regarding the Bluetooth module (here) and the USB-stick module (PC-1600 only) in the other thread.
If you want to switch e.g. from the BT module to the USB-stick module, please inform me in one of the threads
@Dom, Over_score, seb_A2: I moved your requests to the other thread (right?)